Sindbad~EG File Manager
#! /usr/libexec/atf-sh
# $FreeBSD$
#
# SPDX-License-Identifier: BSD-2-Clause-FreeBSD
#
# Copyright (c) 2021 Rubicon Communications, LLC (Netgate)
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
. $(atf_get_srcdir)/utils.subr
. $(atf_get_srcdir)/runner.subr
pipe_head()
{
atf_set descr 'Basic pipe test'
atf_set require.user root
}
pipe_body()
{
fw=$1
firewall_init $fw
dummynet_init $fw
epair=$(vnet_mkepair)
vnet_mkjail alcatraz ${epair}b
ifconfig ${epair}a 192.0.2.1/24 up
jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
# Sanity check
atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
jexec alcatraz dnctl pipe 1 config bw 30Byte/s
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1000 pipe 1 ip from any to any"
# single ping succeeds just fine
atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
# Saturate the link
ping -i .1 -c 5 -s 1200 192.0.2.2
# We should now be hitting the limits and get this packet dropped.
atf_check -s exit:2 -o ignore ping -c 1 -s 1200 192.0.2.2
}
pipe_cleanup()
{
firewall_cleanup $1
}
pipe_v6_head()
{
atf_set descr 'Basic IPv6 pipe test'
atf_set require.user root
}
pipe_v6_body()
{
fw=$1
firewall_init $fw
dummynet_init $fw
epair=$(vnet_mkepair)
vnet_mkjail alcatraz ${epair}b
ifconfig ${epair}a inet6 2001:db8:42::1/64 up no_dad
jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2/64 up no_dad
# Sanity check
atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2
jexec alcatraz dnctl pipe 1 config bw 100Byte/s
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1000 pipe 1 ip6 from any to any"
# Single ping succeeds
atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2
# Saturate the link
ping6 -i .1 -c 5 -s 1200 2001:db8:42::2
# We should now be hitting the limit and get this packet dropped.
atf_check -s exit:2 -o ignore ping6 -c 1 -s 1200 2001:db8:42::2
}
pipe_v6_cleanup()
{
firewall_cleanup $1
}
queue_head()
{
atf_set descr 'Basic queue test'
atf_set require.user root
}
queue_body()
{
fw=$1
firewall_init $fw
dummynet_init $fw
epair=$(vnet_mkepair)
vnet_mkjail alcatraz ${epair}b
ifconfig ${epair}a 192.0.2.1/24 up
jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \
$(atf_get_srcdir)/../pf/echo_inetd.conf
# Sanity check
atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
reply=$(echo "foo" | nc -N 192.0.2.2 7)
if [ "$reply" != "foo" ];
then
atf_fail "Echo sanity check failed"
fi
jexec alcatraz dnctl pipe 1 config bw 1MByte/s
jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+
jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all
jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1000 queue 100 tcp from 192.0.2.2 to any out" \
"ipfw add 1001 queue 200 icmp from 192.0.2.2 to any out" \
"ipfw add 1002 allow ip from any to any"
# Single ping succeeds
atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
# Unsaturated TCP succeeds
reply=$(echo "foo" | nc -w 5 -N 192.0.2.2 7)
if [ "$reply" != "foo" ];
then
atf_fail "Unsaturated echo failed"
fi
# Saturate the link
ping -f -s 1300 192.0.2.2 &
# Allow this to fill the queue
sleep 1
# TCP should still just pass
fails=0
for i in `seq 1 3`
do
result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c)
if [ $result -ne 2048000 ];
then
echo "Failed to prioritise TCP traffic. Got only $result bytes"
fails=$(( ${fails} + 1 ))
fi
done
if [ ${fails} -gt 0 ];
then
atf_fail "We failed prioritisation ${fails} times"
fi
# This will fail if we reverse the pola^W priority
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1000 queue 200 tcp from 192.0.2.2 to any out" \
"ipfw add 1001 queue 100 icmp from 192.0.2.2 to any out" \
"ipfw add 1002 allow ip from any to any"
jexec alcatraz ping -f -s 1300 192.0.2.1 &
sleep 1
fails=0
for i in `seq 1 3`
do
result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c)
if [ $result -ne 2048000 ];
then
echo "Failed to prioritise TCP traffic. Got only $result bytes"
fails=$(( ${fails} + 1 ))
fi
done
if [ ${fails} -lt 3 ];
then
atf_fail "We failed reversed prioritisation only ${fails} times."
fi
}
queue_cleanup()
{
firewall_cleanup $1
}
queue_v6_head()
{
atf_set descr 'Basic queue test'
atf_set require.user root
}
queue_v6_body()
{
fw=$1
firewall_init $fw
dummynet_init $fw
epair=$(vnet_mkepair)
vnet_mkjail alcatraz ${epair}b
ifconfig ${epair}a inet6 2001:db8:42::1/64 no_dad up
jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2 no_dad up
jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \
$(atf_get_srcdir)/../pf/echo_inetd.conf
# Sanity check
atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2
reply=$(echo "foo" | nc -N 2001:db8:42::2 7)
if [ "$reply" != "foo" ];
then
atf_fail "Echo sanity check failed"
fi
jexec alcatraz dnctl pipe 1 config bw 1MByte/s
jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+
jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all
jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1001 queue 100 tcp from 2001:db8:42::2 to any out" \
"ipfw add 1000 queue 200 ipv6-icmp from 2001:db8:42::2 to any out" \
"ipfw add 1002 allow ip6 from any to any" \
"pf" \
"pass out proto tcp dnqueue 100" \
"pass out proto icmp6 dnqueue 200"
# Single ping succeeds
atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2
# Unsaturated TCP succeeds
reply=$(echo "foo" | nc -w 5 -N 2001:db8:42::2 7)
if [ "$reply" != "foo" ];
then
atf_fail "Unsaturated echo failed"
fi
# Saturate the link
ping6 -f -s 1200 2001:db8:42::2 &
# Allow this to fill the queue
sleep 1
# TCP should still just pass
fails=0
for i in `seq 1 3`
do
result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c)
if [ $result -ne 1024000 ];
then
echo "Failed to prioritise TCP traffic. Got only $result bytes"
fails=$(( ${fails} + 1 ))
fi
done
if [ ${fails} -gt 0 ];
then
atf_fail "We failed prioritisation ${fails} times"
fi
# What happens if we prioritise ICMP over TCP?
firewall_config alcatraz ${fw} \
"ipfw" \
"ipfw add 1001 queue 200 tcp from 2001:db8:42::2 to any out" \
"ipfw add 1000 queue 100 ipv6-icmp from 2001:db8:42::2 to any out" \
"ipfw add 1002 allow ip6 from any to any" \
"pf" \
"pass out proto tcp dnqueue 200" \
"pass out proto icmp6 dnqueue 100"
fails=0
for i in `seq 1 3`
do
result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c)
if [ $result -ne 1024000 ];
then
echo "Failed to prioritise TCP traffic. Got only $result bytes"
fails=$(( ${fails} + 1 ))
fi
done
if [ ${fails} -lt 3 ];
then
atf_fail "We failed reversed prioritisation only ${fails} times."
fi
}
queue_v6_cleanup()
{
firewall_cleanup $1
}
setup_tests \
pipe \
ipfw \
pipe_v6 \
ipfw \
queue \
ipfw \
queue_v6 \
ipfw
Sindbad File Manager Version 1.0, Coded By Sindbad EG ~ The Terrorists